Всем привет. Кто имел дело с данным девайсом?
Не получается прошить тестовый sketch
Работаю в VS 2022 c vMicro.
После прошивки выдает следующее:
Не получается прошить тестовый sketch
Работаю в VS 2022 c vMicro.
После прошивки выдает следующее:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x40376f05
SPIWP:0xee
mode
IO, clock div:1
load:0x3fce2820,len:0x1188
load:0x403c8700,len:0x4
load:0x403c8704,len:0xbf0
load:0x403cb700,len:0x30e4
entry 0x403c88ac
E (184) ADC: CONFLICT! driver_ng is not allowed to be used with the legacy driver
abort() was called at PC 0x42046897 on core 0
Backtrace: 0x40376522:0x3fceb1e0 0x4037d969:0x3fceb200 0x40384399:0x3fceb220 0x42046897:0x3fceb2a0 0x4200f31a:0x3fceb2c0 0x403768ed:0x3fceb2f0 0x403ccb70:0x3fceb340 0x403ccf35:0x3fceb380 0x403c8919:0x3fceb4b0 0x40045c01:0x3fceb570 0x40043ab6:0x3fceb6f0 0x40034c45:0x3fceb710
ELF file SHA256: 7bd455961
E (212) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
E (220) esp_core_dump_elf: Elf write init failed!
E (224) esp_core_dump_common: Core dump write failed with error=-1
Rebooting...
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x40376f05
SPIWP:0xee
mode
IO, clock div:1load:0x3fce2820,len:0x1188
load:0x403c8700,len:0x4
load:0x403c8704,len:0xbf0
load:0x403cb700,len:0x30e4
entry 0x403c88ac
E (184) ADC: CONFLICT! driver_ng is not allowed to be used with the legacy driver
abort() was called at PC 0x42046897 on core 0
Backtrace: 0x40376522:0x3fceb1e0 0x4037d969:0x3fceb200 0x40384399:0x3fceb220 0x42046897:0x3fceb2a0 0x4200f31a:0x3fceb2c0 0x403768ed:0x3fceb2f0 0x403ccb70:0x3fceb340 0x403ccf35:0x3fceb380 0x403c8919:0x3fceb4b0 0x40045c01:0x3fceb570 0x40043ab6:0x3fceb6f0 0x40034c45:0x3fceb710
ELF file SHA256: 7bd455961
E (212) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
E (220) esp_core_dump_elf: Elf write init failed!
E (224) esp_core_dump_common: Core dump write failed with error=-1
Rebooting...